天津华利保温建材有限公司

HuaLi


	Ceramic wool product heat preservation material

	Glass wool thermal insulation material

	pattern aluminum plate introduction

	Rubber-plastic products
	Rubber-plastic products
	Stainless steel tape and
	stainless steel clamp
	Three-protection thermal insulation quilt

	Rock wool thermal insulation material


	corporation_introduction

	Pictures_of_project

	Project_achievement

Tel:	022-25211658 022-25211666
Fax :	022-25211666 022-25210644
E-Mail:	huali@yp.ce.net.cn
url：	www.hualibw.com
adr：	Tianjin Tanggu marine high-tech development zones in Danjiang Road 666

PATTERN ALUMINUM PLATE INSTRUCTION

On the basis of advanced technology and standard abroad, a new decorate material (the pattern aluminum plate) are produced dependence on more experience on the production and fabrication. The material has been achieved the new patent production by Technical Bureau of P. R. China. The patent no. is 002072033. This material can improve the quality of insulation efficiently, and it has the performance of moisture-proof, anticorrosive, and wearable. In many fields, such as shipping, chemical, and metallurgy, thermoelectrical, architecture industry, and offshore oil, it can be widely used in the equipment protection and insulation decoration.

Composite figured aluminum plate series product composed normal type and rust-resist type Specification of normal type composite figured aluminum plate series product

Aluminum Plate (National standard)	Alloy No.	1060
	Condition	H 14 或 H 24 (Half Rigidity)
	Chemical Element	Si	Fe	Cu	Mn	Mg	Cr
		0.25	0.35	0.05	0.03	0.03	-
		Ni	Zn	Ti	Zr	Al	other
		-	0.05	0.03	-	99.6	0.03
	Stretching Resistance	85~120Mpa
	Extensibility	(50mm) ≥ 3%
	standard	GB/T8544-97 ASTM B209 QB/HL 002-2003

Specification of rust-resist type composite figured aluminum plate series product

Aluminum Plate (National standard)	Alloy No.	3003
	Condition	H 14 或 H 24 (Half Rigidity)
	Chemical Element	Si	Fe	Cu	Mn	Mg	Cr
		0.6	0.7	0.05-0.2	1.0-1.5	-	-
		Ni	Zn	Ti	Zr	Al	other
		-	0.10	-	-	remain	0.15
	Stretching Resistance	135~175Mpa
	Extensibility	(50mm) ≥ 3%
	standard	GB/T8544-97 ASTM B209 QB/HL 002-2003

Improvement of composite figured aluminum board----- the pattern aluminum plate and composite corrugated aluminum board

Composite figured aluminum board is widely used in thermal insulation project and has embodied its superiority. But in the application of equipment, such as case body and pot body, etc., it still has the advantages of rough relatively surface and the appearance is not ideal enough. According to this situation, our company developed composite ripple aluminum board and composite corrugated aluminum board, which are suitable for the thermal insulation of pot body and small-scale equipment, has avoid the emergence of above-mentioned situations effectively.

PRODUCTIONS SPECIATION the pattern aluminum plate

Product Size	Length (mm)	Width (mm)	Thickness (mm)
	30000 ± 100	1000 ± 5	0.4±0.05
	25000 ± 100	1000 ± 5	0.5±0.05
	25000 ± 100	1000 ± 5	0.6±0.05
	2000 ± 10	1000 ± 5	0.8±0.05
	2000 ± 10	1000 ± 5	1.0±0.05

waved aluminum plate

pressing-profiled plate pattern ： V32 effective cover width ： 900mmstretch width ： 1000mm thickness ： 0.4mm-1.0mm

pressing-profiled plate pattern ： V65 effective cover width ： 900 mmstretch width ： 1000mm thickness ： 0.4mm-1.0mm

tile aluminum plate

pressing-profiled plate pattern ： V205 effective cover width ： 820mm stretch width ： 1000mm thickness ： 0.4mm-1.0mm

Performance and characteristics

（ 1 ） Aluminum board is rolled as figured board to increase its strength and ductility. Can reduce the thickness of using and increase its lifetime.

Table1 ： State code of figured aluminum board and state code before ginning

State code of figured aluminum board	State code before ginning
H134	H12 （ 1/4 hard states ）
H254	H14 or H24 （ semi-hard state ）
H174	H16 （ 3/4 hard states ）
H194	H18 （ hard states ）

Table 2 ： The thickness selecting type is contrasted (under the situation of equal compression strength)

Aluminum board	Composite figured aluminum board	Composite ripple aluminum board
0.5mm	0.4mm	0.3mm
0.6mm	0.5mm	0.4mm
0.8mm	0.6mm	0.5mm
1.0mm	0.8mm	0.7mm

（ 2 ） Composite figured aluminum board has better bribability, better durability and can effectively reduce rowing, rubbing, touching damage and waste.

（ 3 ） Compound the kraft paper at the aluminum board to prevent from moisture so to protect the aluminum board from oxidize. It also plays a damp proof and antiseptic role.

(4) Regular pattern on the level aluminum board will not cause strong light reflecting and can have a good vision effect..

(5) Composite ripple aluminum board besides having above-mentioned advantages, its compression strength raise greatly, it is easier to construct, can reduce the thickness of selecting suitable materials

. (6) Rust–resisting composite figured aluminum board has all of the advantages above. Besides, it has the performance of corrosion-resist, sea water-resist and is widely used in the fields of chemical industry, boat, etc.